Octax® Solo 10 Gbps Ethernet Interconnect System


Main: Octax®-Solo plug and flange-mount receptacle connectors. Inset: Octax®-Solo flange-mount straight PC tail receptacle.

Ultra High-Speed Interconnect Solution

The Amphenol CIT's Octax®-Solo 10 Gbps Ethernet Connector is a single-port, standalone connector designed for a wide variety of aerospace and military applications.

The Octax connector:

  • Uses innovative inserts that isolate each twisted pair and contact, virtually eliminating near-end crosstalk

  • Features cable and twists that are maintained extremely close to the contacts, minimizing characteristic impedance mismatch

  • Delivers 10x the transmission speed (10 Gbps signal) and 2x the density compared to Quadrax-type solutions

Available through Amphenol CIT Direct!
Select PNs are available off-the-shelf in low-volume quantities through our Amphenol CIT Direct Service.


Features & Benefits

Feature Benefit
Gigabit and 10 Gb Ethernet data transfer speed Allows for higher data quantities to transfer at quicker speeds covering a variety of 1 Gb
applications and emerging 10 Gb needs
Field repairable Designed for easier and less costly on-site termination repair
Uses standard 22D crimp contacts (M39029) Standard off-the-shelf contacts are readily available and requires no special tooling
Small form factor Critical space savings for highly dense applications
Anti-decoupling/self-locking mechanism for
rugged environments
Connector will not disconnect/uncouple in a high-vibration application

Suggested Applications

  • Single-Port 10 Gbps Ethernet connector (compatible with Amphenol CIT Gigabit Series Ethernet Cables)
    • Aerospace and military
    • Avionics
    • IFEC
    • High definition video displays
    • Data loading
  • Any high-speed Ethernet application

 

Test Results

Parts Table

Part Number Description Finish
OCTAX-SOLO-FMR Flange mount receptacle connector Ni PTFE
OCTAX-SOLO-JNR Jam nut receptacle connector Ni PTFE
OCTAX-SOLO-IR Inline (flange-less)  receptacle connector Ni PTFE
OCTAX-SOLO-P Plug connector Ni PTFE
OCTAX-SOLO-FM-PCB* Straight PCB flange mount receptacle connector Ni PTFE
OCTAX-SOLO-FMR-W Flange mount receptacle connector CADMIUM OD
OCTAX-SOLO-JNR-W Jam nut receptacle connector CADMIUM OD
OCTAX-SOLO-IR-W Inline (flange-less)  receptacle connector CADMIUM OD
OCTAX-SOLO-P-W Plug connector CADMIUM OD

*Jam nut design also available

Octax-Solo-Part-Numbering

Product Information Resources

Octax® Solo datasheet


Product Categories

Connectors & Accessories

Product Markets

Commercial Aerospace
Military-Defense

More Information

To inquire about Octax® Solo 10 Gbps Ethernet Interconnect System available from Amphenol CIT, please fill out the form below, and one of our Sales Engineers will contact you.

"*" indicates required fields

cookie*

Need Low Volume Quantities?

Order through Amphenol CIT Direct!


Order now!


Test Scope Per Specification Notes
Environmental
Operating Temperature Range -65 °C to 175 °C
Altitude Immersion EIA-364-03 70,000 ft., 500 VRMS
Fungus MIL-STD-810 By Similarity
Contamination by Fluids MIL-STD-810 By Similarity
Sand and Dust MIL-STD-810 By Similarity
Corrosion Resistance EIA-364-26, Condition A 100 hrs
Mechanical
Vibration - Random EIA-364-28, Condition V, Letter "J"
Durability MIL-DTL-38999 500 Mate/Unmate Cycles
Mating Cycles EIA-364-28, Condition V, Letter "J"
Coupling Torque EIA-364-8310 mV drop
Contact Retaining Force EIA-364-29, Method B6 lbs max, .012" Displacement
Electrical
Dielectric Withstand Voltage EIA-364-20 500VRMS, 60Hz
Data Rate 10 Gbps

OCTAX-SOLO-FMRCheck Inventory
OCTAX-SOLO-PCheck Inventory
OCTAX-SOLO-PCBCheck Inventory

Member of
©2024 Amphenol CIT. All Rights Reserved.
All trademarks, service marks and trade names are property of their respective holding companies.
Amphenol CIT products are subject to U.S. export control regulations.
They may be subject to certain licensing requirements and restricted for export.